Filmprojectoren Siemens

Alle Apparaten | Diaprojector Onderdelen | Diaprojectoren | Diversen | Elektronica | Film camera - analoog | Film-, dia- en fotoscanners | Filmomspoelers | Filmprojector Onderdelen | Filmprojectoren | Films | Formaten | Foto Vergroters | Fotografica | Informatie | Lampen | Plakpersen | Video-onderdelen | Videoapparatuur | Vieweronderdelen | Viewers | Zelf Digitaliseren

 

Siemens, 2000

Bekijk detail informatie

The projectors work with a combination of a resistor and lamp.
Depending on the type of resistor you can use a specific lamp. 
This is described in the user manual in detail. The lamps use base P28s.
P28s 100-120V 500W
P28s 100-120V 750W
P28s 100-120V 1000W

Film gate is totally removable so it gives you access to all areas when cleaning is needed after showing a feature.

The film pressure plate gate has a back shoe sprung gate(rear pressure plate) compared to the standard sprung gate (front pressure plate) that is found on all other makes of 16mm projectors. The advantage of having a rear pressure plate is that it can project warped or shrunken hard to run prints and keeps them in focus every time.

The 3 claw mechanism is situated on the front plate near the lens holder which works extremely well when running films with either worn or torn sprocket holes. As well as keeping the film lodged in the film gate for smooth running. ?

For maximum light output this projector has a special control knob for the selection of shutter speed operation. When operating on 16 or 18 frames per second, the 3 bladed shutter position should be used. By using 20 to 24 frames per second, the 2-bladed shutter position is selected which increases the light output even further. This function is also handy when transferring film to HD or DVD.

This machine is fitted with a stroboscope which is used to judge the correct running speed of the projector in 16,18,20,24 frames per second. The speed will remain constant no matter what size of film spool or length of operation. Additional speeds of either +/- 5% can be obtain with an option to throw single frames during projection.

An Ampere-meter is used to control the lamp circuit current which depends on the type of lamp used Either a 250volts 500,750 or 1000 watt lamps can be used.

Sound Amplification is run by a separate amplifier which can be connected to other auxiliary applications for recording or stereo reproduction from the projector if needed. This amplifier which gives out a very warm and deep sweet sound as you will only find with Siemens amplifiers of this type. There is separate bass and treble controls along with a selector for magnetic or optical sound tracks amplification. This amplifier is also equipped with the ability to record on magnetic sound film at the press of a button. You also have a built in Oscilloscope to measure the sound frequency when recording on sound magnetic film.
Specifications

REEL CAPICITY = 650m (2,200 feet). Can be extended to 4,000ft with extension arms not supplied.
THREADING = Manuel (less chance of film damage).
RUNNING SPEED = 16/18/20/24 Frames per second with additional +/- 5%.
POWER INPUT = 110/125/150/220/240V 40 to 60 Hz.
SHUTTER SPEED = 2 or 3 Blades.
AMPERE-METER = Used for monitoring light voltage.
LAMP SETTING = By turning the master switch further clockwise the screen brilliance can be increased.
LAMP ADJUSTMENT = Possible by turning the lamp adjustment control knobs to get a maximum light output.
PROJECTOR LAMP = 500/750/1000 W. (New 1000w lamp fitted)
EXCITER LAMP = BRK, 4V-0.75A.
SOUND = Can play back 16mm films with either magnetic or Optical sound track.
PILOT LAMP = To be used in low light conditions to help threading or checking film movement whilst being projected.
SCANNING ADJUSTMENT = Alignment adjustment can be made at any time on Optical prints where the sound track is not printed in the correct position by just using a coin.
LENS = Standard Astro - Kino - Color V 1:1,5 50mm plus additional lens 1:1,8 25mm lens.
SOUND TYPE = Optical sound Magnetic sound Playback & Recording possible.
AMPLIFIER = 15watts RMS output, 5 Tube amplification with separate Bass and Treble controls.
ELEVATION = Fast acting tilt control knob.
AUTOMATIC INCHING = For checking free transportation., correct loops and free movement of both reels and correct threading before use.
REWIND = High speed rewind if required by pressing the clutch lever on the take up spindle.
LUBRICATION = As the projector is self lubricating it is unnecessary to oil any part of it.
MADE IN GERMANY BERLIN - MUNCHEN (This is a genuine Siemens product)

One of our Siemens 2000 projectors has been used in this video clip: Y.V.E. 48 - All You Need (Official Music Video) by Armada Music:

The projectors work with a combination of a resistor and lamp.
Depending on the type of resistor you can use a specific lamp. 
This is described in the user manual in detail. The lamps use base P28s.
P28s 100-120V 500W
P28s 100-120V 750W
P28s 100-120V 1000W

Film gate is totally removable so it gives you access to all areas when cleaning is needed after showing a feature.

The film pressure plate gate has a back shoe sprung gate(rear pressure plate) compared to the standard sprung gate (front pressure plate) that is found on all other makes of 16mm projectors. The advantage of having a rear pressure plate is that it can project warped or shrunken hard to run prints and keeps them in focus every time.

The 3 claw mechanism is situated on the front plate near the lens holder which works extremely well when running films with either worn or torn sprocket holes. As well as keeping the film lodged in the film gate for smooth running. ?

For maximum light output this projector has a special control knob for the selection of shutter speed operation. When operating on 16 or 18 frames per second, the 3 bladed shutter position should be used. By using 20 to 24 frames per second, the 2-bladed shutter position is selected which increases the light output even further. This function is also handy when transferring film to HD or DVD.
Meer lezen

Relevante producten

  SF-0252
Oorspronkelijke prijs was: € 379,00.Huidige prijs is: € 359,00.
  RW-0062
  SF-0013

Afbeeldingen

Klik op een afbeelding om te vergroten.

  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000
  • Siemens 2000

;

Veelgestelde Vragen

Tips voor het repareren van een filmprojector en adressen voor reparatiebedrijven

Tips voor het repareren van een filmprojector en adressen voor reparatiebedrijven

Link to this page: https://van-eck.net/hrf_faq/kan-ik-zelf-mijn-filmprojector-of-diaprojector-repareren/

Kan ik zelf mijn filmprojector of diaprojector repareren?

Dat hangt sterk af van uw eigen handigheid. Als een projector lang stil heeft gestaan dan begint een reparatie vaak met:
  • oud vet verwijderen
  • nieuwe smering aanbrengen
  • vervangen van snaren
  • lamp vervangen
Als je wat handig bent, dan zijn bovenstaande problemen vaak zelf op te lossen, met de juiste gereedschappen en onderdelen. Dit lost in veel gevallen de problemen op. Echter niet altijd. Andere veel voorkomende problemen:
  • de lampvoet is defect
  • tandwielen zijn gescheurd en moeten vervangen worden
  • elektronische componenten zijn defect. Je kan denken aan condensatoren, diodes, weerstanden, ICs.
  • de grijper afstelling klopt niet meer
  • de kader instelling moet bijgesteld worden
  • de nokken / nokvolger moet vervangen worden.
Voor deze problemen het vaak nodig om een vakman in te schakelen. Voor onderdelen te bestellen, zie onze onderdelenzoeker. Gereedschap voor reparatie filmprojectoren en diaprojectoren Onderhoudsmiddelen voor het reinigen en smeren van uw filmprojector of diaprojector  

Adressen voor onderhoud en reparatie film en video apparatuur

Nederland:
  • Corona Beeldtechniek – Almere, https://www.coronabeeldtechniek.nl/projector-reparatie/  +31 (0)36 546 9565     service@coronabeeldtechniek.nl (alles)
  • Erik Snel – Drachten, E-mail: menerik.snel@gmail.com (specialist Eumig en mechanische problemen)
  • Digital Super8 – Venray, E-mail: digitalsuper8@gmail.com – reparatie van Elmo GS1200 en Bauer super8 projectoren. Op basis van intake wordt bepaald of reparatie mogelijk is of wordt eventueel doorverwezen
  • Electro Service Midden Brabant (Udenhout – Noord Brabant) : https://www.esmb.nl: Video, Camcorders, Bandrecorders
  • Technivision www.technivision.nl Eindhoven: reparaties aan beeld en geluidsapparatuur
België:
  • Steve De Wachter, E-mail: kipropsandcollectables@gmail.com, Korenbloemstraat 24, 9150 Kruibeke, Oost-Vlaanderen, België.
Australie:
  • Joel Bleakley – Melbourne area – joelbleakley@gmail.com
Frankrijk: Italy:
  • Ciao da Francesco E-mail: prospero1977@hotmail.com (16mm, 35mm, 70mm film equipment)
United Kingdom:
  • John White Projector Repair: http://www.the8mmshedshop.co.uk/
United States:
  • John Capazzo – New Jersey USA – Phone:  973 923 0636  – Repairs Elmo, Eumig ans Sankyo
  • Bill Phillips  – 16mmprojector repair  https://16mmprojectorrepair.com/  pcav@optonline.net  – Eiki, B&H, Hokushin, Long Island, NY.
  • http://www.rcsclassic16mm.com/ – Flin, MI, USA – B&H, EIKI, Elmo, Ringmaster
  • Paul Fortea (Chicage area) : Offering worm gear replacement and rebuilds on all Bell and Howell 1500-2500 series autoload or manual load projectors,no slotloads,prices will very.. basic rebuilds include new aircraft aluminum gear,new main drive motor belt,timing adjustment,cleaning old and new lubrication..any other parts would need to be replaced ,any soundboard issues I do not work on,either the board needs to be replaced or you will need to find an electronic person to diagnose,shipping both ways is your cost,if you live in the midwest dropoff is accepted…turnaround times varies,but usually a week or less..please email paulfortea@aol.com me if you have interest
Canada: