Presstape – 16mm film<\/p>\n
Splicer tape (presstapes) for 16mm films.<\/p>\n
These are for attaching 16mm film.
\nEach tape is perforated and transparent.
\nThis package contains 40 tape strips, for 20 splices.
\nUse a tape strip on each side of the film for a neat and durable connection.<\/p>\n
The press tapes are suitable for use with
\n– Kodak PRESSTAPE Universal Splicer
\n– Van Eck Presstape Universal Splicer<\/p>\n
The tapes can be used for almost all tape-based 16mm splicers.<\/p>\n
(If you have your films digitized by Van Eck Video Services, you do not need to do this yourself\u2014this is included by default with the film transfer\/digitization service.<\/em>)<\/p>\r\n Leader and trailer strips are empty pieces of film attached to the beginning (leader) and end (trailer) of a film. They serve several important functions:<\/p>\r\n Protection:<\/strong> They prevent the first frames of the actual film from being damaged during threading into the projector.<\/p>\r\n<\/li>\r\n Ease of threading:<\/strong> The projector can more easily pick up the film and transport it correctly.<\/p>\r\n<\/li>\r\n Stability:<\/strong> The leader allows the projector to reach the correct speed and stability before the actual image begins.<\/p>\r\n<\/li>\r\n Identification:<\/strong> Different colors are often used (e.g., white or transparent for the beginning, red for the end) to clearly indicate where the film starts or ends.<\/p>\r\n<\/li>\r\n<\/ul>\r\n \ud83d\udc49 Make sure the leader strip is long enough (approximately 60\u201390 cm is ideal).<\/p>\r\n \ud83d\udc49 Depending on the brand\/type of projector used, the beginning of the leader may need to have a specific shape. This is usually indicated in the projector\u2019s manual. The three most commonly used shapes are: straight, angled, and rounded. Before playing the film, it is important to inspect it thoroughly.<\/p>\r\n What to check:<\/strong><\/p>\r\n Tears or holes near the perforations:<\/strong> These can cause transport issues or film jams.<\/p>\r\n<\/li>\r\n Splices:<\/strong> These are the connections between two pieces of film, often made using tape or film cement\/splicing glue.<\/p>\r\n<\/li>\r\n<\/ul>\r\n What to do with splices:<\/strong><\/p>\r\n Carefully test their strength. Gently pull on both sides of the splice to check if it still holds well.<\/p>\r\n<\/li>\r\n Ensure the splice lies flat. A splice that is too thick may cause jams during projection.<\/p>\r\n<\/li>\r\n Replace old or weak splices. Use a splicer and the appropriate tape or cement.<\/p>\r\n<\/li>\r\n<\/ul>\r\n A splicer is a device used to neatly join film strips together.<\/p>\r\n Functions:<\/strong><\/p>\r\n Cuts the film straight so both ends align properly.<\/p>\r\n<\/li>\r\n Aligns perforations for smooth transport through the projector.<\/p>\r\n<\/li>\r\n Applies tape or cement accurately to create a strong, flat connection.<\/p>\r\n<\/li>\r\n<\/ul>\r\n Tips:<\/strong><\/p>\r\n Clean the splicer regularly.<\/p>\r\n<\/li>\r\n Practice on a piece of old film if you have no prior experience.<\/p>\r\n<\/li>\r\n<\/ul>\r\n Clean the projector\u2014especially the sprockets, film guides, and lens.<\/p>\r\n<\/li>\r\n Use a film cleaner to remove dust and dirt from the film.<\/p>\r\n<\/li>\r\n Optionally, use a film rewinder to evenly wind the film after playback.<\/p>\r\n<\/li>\r\n<\/ul>\r\n By carefully following these steps, you will extend the lifespan of your Super 8 film and ensure a stable, trouble-free projection.<\/p>\n References1. Use of Leader and Trailer Strips<\/h3>\r\n
\r\n
To create this shape, it's best to use a film trimmer. Sometimes this is built into the projector, but separate trimmers are also available:<\/p>\r\n
\r\n2. Film and Splice Inspection<\/h3>\r\n
\r\n
\r\n
\r\n3. Using a Splicer<\/h3>\r\n
\r\n
\r\n
\r\n4. Other Important Preparations<\/h3>\r\n
\r\n
\n\r\n