Film Projectors Eumig

All Devices | Digitize by Yourself | Electronics | Film Camera - analogue | Film Projector Parts | Film Projectors | Film, slide and photo scanners | Formats | Information | Miscellaneous | Photo Enlargers | Rewinders | Slide Projector Parts | Slide Projectors | Splicers | Video Equipment | Video Parts | Viewer Parts | Viewers

 

Eumig, PII

Show device details

Eumig PII or "Super" cine projector.

Produced from 1935 in Germany.

Seperate models for 8mm, 9,5mm and 16mm.

Mainly of pressed steel construction it was the Eumig P11 but generally known as the "Super".

Available from around 1935 to 1939 it took 400 foot spools, had motor drive, specially designed efficient claw/cam mechanism, 35mm Meyer f1.6 lens and a 250 or 400 watt lamp making for nice bright pictures. A feature was the special side sprung sprockets where the film was just clipped on.

Variable speed, reverse running, stills, true optical framing, motor rewind and a pilot lamp were provided.



Photos: Bert Trip

https://van-eck.net/en/product-category/lamps-en/lamps-bayonet-fitting/?filters=product_cat[p28s]

Eumig PII or "Super" cine projector.

Produced from 1935 in Germany.

Seperate models for 8mm, 9,5mm and 16mm.

Mainly of pressed steel construction it was the Eumig P11 but generally known as the "Super".

Available from around 1935 to 1939 it took 400 foot spools, had motor drive, specially designed efficient claw/cam mechanism, 35mm Meyer f1.6 lens and a 250 or 400 watt lamp making for nice bright pictures. A feature was the special side sprung sprockets where the film was just clipped on.

Variable speed, reverse running, stills, true optical framing, motor rewind and a pilot lamp were provided.



Photos: Bert Trip Meer lezen

Relevant products

  BT-1070-M
  ET-0001
  DV-0038

Images

Click on an image to enlarge.

  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII
  • Eumig PII

;

Frequently asked questions

Can I repair my film projector or slide projector myself?

Can I repair my film projector or slide projector myself? It depends very much on your own dexterity. If a projector has been idle for a long time, a repair often begins with:
  • removing old fat
  • apply new lubrication
  • replacing strings
  • lamp replacement
If you are somewhat handy, the above problems can often be solved yourself, with the right tools and parts. This solves the problems in many cases. However, not always. Other common problems:
  • the lamp base is defective
  • gears are cracked and need to be replaced
  • electronic components are defective. You can think of capacitors, diodes, resistors, ICs.
  • the gripper adjustment is no longer correct
  • the framework setting must be adjusted
  • the cam / cam follower needs to be replaced.
For these problems it is often necessary to call in a professional. For parts to order, see our parts finder . Tools for repairing film projectors and slide projectors Maintenance products for cleaning and lubricating your film projector or slide projector   Addresses for maintenance and repair film and video equipment Netherlands:
  • Corona Image Technology – Almere, https://www.coronabeeldtechniek.nl/projector-reparatie/ +31 (0)36 546 9565 service@coronabeeldtechniek.nl (all)
  • Rotronica – Krimpen aan den IJssel, https://www.rotronica.nl/ phone: 0180-786005, e-mail: info@rotronica.nl (all)
  • Peter Groenenboom – Breukelen , https://www.groenenboommultimedia.nl/ (long delivery time, specialist Bauer and electronics) / +31 (0)346-830497
  • Erik Snel – Drachten, E-mail: menerik.snel@gmail.com, whatsapp: +31 (0) 6-52598299 (specialist Eumig and mechanical problems)
  • Digital Super8 – Venray, E-mail: digitalsuper8@gmail.com – repair of Elmo GS1200 and Bauer super8 projectors. Based on the intake, it is determined whether repair is possible or if necessary, a referral will be made.
  • Electro Service Midden Brabant (Udenhout – North Brabant) : https://www.esmb.nl: Video, Camcorders, Tape recorders
Australia:
  • http://www.projectorheaven.com.au/ – Goldcoast – dogtor@projectorheaven.com.au phone: 04111 43338
  • Joel Bleakley – Melbourne area – joelbleakley@gmail.com
Italy:
  • Ciao da Francesco E-mail: prospero1977@hotmail.com (16mm, 35mm, 70mm film equipment)
United Kingdom:
  • John White Projector Repair: http://www.the8mmshedshop.co.uk/
United States:
  • John Capazzo – New Jersey USA – Phone: 973 923 0636 – Repairs Elmo, Eumig ans Sankyo
  • Bill Phillips – 16mmprojector repair https://16mmprojectorrepair.com/ – Eiki, B&H, Hokushin, Long Island, NY.
  • http://www.rcsclassic16mm.com/ – Flin, MI, USA – B&H, EIKI, Elmo, Ringmaster
Canada:
  • Cinemartin https://en.cinemartin.org/ – Film projection – Repair – 16mm looper