Film Projectors Chinon

All Devices | Digitize by Yourself | Electronics | Film Camera - analogue | Film Projector Parts | Film Projectors | Film, slide and photo scanners | Films | Formats | Information | Lamps | Miscellaneous | Photo Enlargers | Photograpy | Rewinders | Slide Projector Parts | Slide Projectors | Splicers | Video Equipment | Video Parts | Viewer Parts | Viewers

 

Chinon, Sound 7000

Show device details

Chinon Sound 7000

marketed in 1977-78
super 8 mm film
lens: Chinon Zoom f: 1.3 F: 15-30 mm
lamp:
150 W, 120 V, DNE (for Usa and Canada)
100 W, 12 V, EFP (for other countries)
pilot lamp: built-in on main switch, 4 V-0.75 A (KE-030)
reel capacity: 180 m
film loading: automatic threading
projection: forward, reverse
projection speed: 18, 24 fps

sound: magnetic playback on main sound track
sound mode: mono
picture/sound distance: 18 fps
amplifier: 2 ICs, 4 transistors, 12 diodes
amplifier output: 4 W (4 Ohm)
recording: magnetic recording on main track, sound-on-sound
recording level control: auto
input terminal: Microphone (0.5 mV, -66 dB, 1.2 kOhm) Auxiliary (300 mV, 470 Ohm)
input jacks: Microphone: 3.5 mm mini jack; Auxiliary: RCA plug (for Canada and Usa) and 5-pin DIN jack (for other countries)
output terminal: Monitor/Line-out, External Speaker (4-8 Ohm)
output jacks: Mon/Line: 3.5 mm diameter jack; Ext Sp: RCA plug (for Canada and Usa) and 2-pin DIN jack (for other countries)
built-in speaker: 2.3 W (4 Ohm)
motor: DC magnetic motor electronically controlled
power source:
120 V AC, 50/60 Hz, 230 W (for Usa and Canada)
130-220-240-250 V AC, 50/60 Hz, 180 W (for other countries)
weight:
7200 g (for Usa and Canada)
8200 g (for other countries)
dimensions: 180 (W) x 245 (H) x 340 (L) mm

made in Japan by Chinon

Auxiliary Input jack: RCA type jack for the model to Usa and Canada; DIN type jack for the other countries


Chinon Sound 7000

marketed in 1977-78
super 8 mm film
lens: Chinon Zoom f: 1.3 F: 15-30 mm
lamp:
150 W, 120 V, DNE (for Usa and Canada)
100 W, 12 V, EFP (for other countries)
pilot lamp: built-in on main switch, 4 V-0.75 A (KE-030)
reel capacity: 180 m
film loading: automatic threading
projection: forward, reverse
projection speed: 18, 24 fps

sound: magnetic playback on main sound track Meer lezen

Relevant products

  BT-0719-M
  FU-0005
  SP-0005
Original price was: € 379,00.Current price is: € 359,00.
  RW-0062
  DV-0038

Images

Click on an image to enlarge.

  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000
  • Chinon Sound 7000

;

Frequently asked questions

Tips for repairing a film projector and addresses for repair shops

Tips for repairing a film projector and addresses for repair shops

Link to this page: https://van-eck.net/hrf_faq/kan-ik-zelf-mijn-filmprojector-of-diaprojector-repareren/

Can I repair my film projector or slide projector myself?

It depends very much on your own dexterity. If a projector has been idle for a long time, a repair often begins with:
  • removing old fat
  • apply new lubrication
  • replacing strings
  • lamp replacement
If you are somewhat handy, the above problems can often be solved yourself, with the right tools and parts. This solves the problems in many cases. However, not always. Other common problems:
  • the lamp base is defective
  • gears are cracked and need to be replaced
  • electronic components are defective. You can think of capacitors, diodes, resistors, ICs.
  • the gripper adjustment is no longer correct
  • the framework setting must be adjusted
  • the cam / cam follower needs to be replaced.
For these problems it is often necessary to call in a professional. For parts to order, see our parts finder . Tools for repairing film projectors and slide projectors Maintenance products for cleaning and lubricating your film projector or slide projector  

Addresses for maintenance and repair film and video equipment

Netherlands:
  • Corona Imaging – Almere, https://www.coronabeeldtechniek.nl/projector-reparatie/ +31 (0)36 546 9565 service@coronabeeldtechniek.nl (all)
  • Erik Snel – Drachten, E-mail: menerik.snel@gmail.com (specialist Eumig and mechanical problems)
  • Digital Super8 – Venray, E-mail: digitalsuper8@gmail.com – repair of Elmo GS1200 and Bauer super8 projectors. On the basis of intake is determined whether repair is possible or is possibly referred
  • Electro Service Midden Brabant (Udenhout – North Brabant) : https://www.esmb.nl: Video, Camcorders, Tape recorders
  • Technivision www.technivision.nl Eindhoven: image and sound equipment repairs
Belgium:
  • Steve De Wachter, E-mail: kipropsandcollectables@gmail.com, Korenbloemstraat 24, 9150 Kruibeke, East Flanders, Belgium.
Australia:
  • Joel Bleakley – Melbourne area – joelbleakley@gmail.com
France: Italy:
  • Ciao da Francesco E-mail: prospero1977@hotmail.com (16mm, 35mm, 70mm film equipment)
United Kingdom:
  • John White Projector Repair: http://www.the8mmshedshop.co.uk/
United States:
  • John Capazzo – New Jersey USA – Phone: 973 923 0636 – Repairs Elmo, Eumig ans Sankyo
  • Bill Phillips – 16mmprojector repair https://16mmprojectorrepair.com/ pcav@optonline.net – Eiki, B&H, Hokushin, Long Island, NY.
  • http://www.rcsclassic16mm.com/ – Flin, MI, USA – B&H, EIKI, Elmo, Ringmaster
  • Paul Fortea (Chicage area) : Offering worm gear replacement and rebuilds on all Bell and Howell 1500-2500 series autoload or manual load projectors,no slot loads,prices will be very…. basic rebuilds include new aircraft aluminum gear,new main drive motor belt,timing adjustment,cleaning old and new lubrication..any other parts would need to be replaced,any soundboard issues I do not work on,either the board needs to be replaced or you will need to find an electronic person to diagnose,shipping both ways is your cost,if you live in the midwest dropoff is accepted…turnaround times varies,but usually a week or less..please email paulfortea@aol.com me if you have interest
Canada: