Film Projectors Bolex

All Devices | Digitize by Yourself | Electronics | Film Camera - analogue | Film Projector Parts | Film Projectors | Film, slide and photo scanners | Films | Formats | Information | Lamps | Miscellaneous | Photo Enlargers | Photograpy | Rewinders | Slide Projector Parts | Slide Projectors | Splicers | Video Equipment | Video Parts | Viewer Parts | Viewers

 

Bolex, Paillard Model G816

Show device details

Bolex Paillard Typ G816

Filmprojector for regular8 and 16mm films.

CONSTRUCTION: Grey satin finish; Chrome plated guide rollers and sprockets; Chrome plated carrying handle with bakelite grip.

REEL CAPACITY: 400 ft reel arms; 800 foot reel arms were available at an additional cost.

THREADING: Manual threading with locking guide rollers to prevent jamming.

POWER: Runs on 110-120v AC or DC power supply. A built-in illuminated ammeter indicates the current supplied to the projection lamp.

LAMP: G.E. Westinghouse or Radiant 750 watt (500 watt optional), 110 volt prefocus bulb. Modern replacement: DDB or CZX bulb

LENS: Interchangeable lenses of various focal lengths; Micrometer focusing.

VARIABLE SPEED: 12 to 24 frames per second; Reverse and still projection; Rapid motor rewind.

OTHER FEATURES: Gear driven film transport; Direct draft ventilation and cooling of lamp and film; Adjustable base with tilting screw for proper alignment of projected image;

OVERALL DIMENSIONS: 13 1/2" x 6 1/2" x 4 3/4"

WEIGHT: 14 lbs (6.3 kg)

Paillard Bolex introduced the newly designed Model G projector in 1936. It was available in "monofilm" or "multifilm" models; the latter included a parts kit of reel spindles, sprockets, gate and guide-rollers that could be used without tools to adapt the projector to the various film guages.
The film transport mechanism featured helical gears and sprockets, rather than the more common belt driven system on most projectors.

As of 1940, the price was $210 for single format models, $235 for dual format and $250 for the Model G-3, without a carrying case. Arms to accommodate 800ft reels could be purchased for an additional cost of $37.50 for any of the models.



Serial Numbers and Dates of Manufacture
The serial number located on Bolex model G projectors can be used to determine the year in which it was manufactured. The table below lists the range of serial numbers allocated to the production run of single and double format type G projectors (e.g. the G-9, G-816, etc.) The second table covers the production run of the tri-film Bolex G3 projector.



Model G Projector :: Serial Numbers
# Year
1000 — 5000 1936
5000 — 32600 1937 / 42
200000 — 205000 1941 / 42
205000 — 210000 1943 / 45
210000 — 215000 1946 / 48
215000 — 220000 1949 / 52
220000 — 225000 1953 / 55
225000 — 226000 1956 / 57

G3 Projector :: Serial Numbers
# Year
100101 — 101000 1939 / 46
101000 — 101540 1947 / 50

For more information, see: http://www.bolexcollector.com/projectors/model-g.html

Bolex Paillard Typ G816

Filmprojector for regular8 and 16mm films.

CONSTRUCTION: Grey satin finish; Chrome plated guide rollers and sprockets; Chrome plated carrying handle with bakelite grip.

REEL CAPACITY: 400 ft reel arms; 800 foot reel arms were available at an additional cost.

THREADING: Manual threading with locking guide rollers to prevent jamming.

POWER: Runs on 110-120v AC or DC power supply. A built-in illuminated ammeter indicates the current supplied to the projection lamp.

LAMP: G.E. Westinghouse or Radiant 750 watt (500 watt optional), 110 volt prefocus bulb. Modern replacement: DDB or CZX bulb

LENS: Interchangeable lenses of various focal lengths; Micrometer focusing. Meer lezen

Relevant products

  SF-0252
  SP-0005
Original price was: € 379,00.Current price is: € 359,00.
  RW-0062
  DV-0038
  SF-0013
  SF-0341
  SF-0255-S
  SF-0255-B

Images

Click on an image to enlarge.

  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816
  • Bolex Paillard Model G816

;

Frequently asked questions

Tips for repairing a film projector and addresses for repair shops

Tips for repairing a film projector and addresses for repair shops

Link to this page: https://van-eck.net/hrf_faq/kan-ik-zelf-mijn-filmprojector-of-diaprojector-repareren/

Can I repair my film projector or slide projector myself?

It depends very much on your own dexterity. If a projector has been idle for a long time, a repair often begins with:
  • removing old fat
  • apply new lubrication
  • replacing strings
  • lamp replacement
If you are somewhat handy, the above problems can often be solved yourself, with the right tools and parts. This solves the problems in many cases. However, not always. Other common problems:
  • the lamp base is defective
  • gears are cracked and need to be replaced
  • electronic components are defective. You can think of capacitors, diodes, resistors, ICs.
  • the gripper adjustment is no longer correct
  • the framework setting must be adjusted
  • the cam / cam follower needs to be replaced.
For these problems it is often necessary to call in a professional. For parts to order, see our parts finder . Tools for repairing film projectors and slide projectors Maintenance products for cleaning and lubricating your film projector or slide projector  

Addresses for maintenance and repair film and video equipment

Netherlands:
  • Corona Imaging – Almere, https://www.coronabeeldtechniek.nl/projector-reparatie/ +31 (0)36 546 9565 service@coronabeeldtechniek.nl (all)
  • Erik Snel – Drachten, E-mail: menerik.snel@gmail.com (specialist Eumig and mechanical problems)
  • Digital Super8 – Venray, E-mail: digitalsuper8@gmail.com – repair of Elmo GS1200 and Bauer super8 projectors. On the basis of intake is determined whether repair is possible or is possibly referred
  • Electro Service Midden Brabant (Udenhout – North Brabant) : https://www.esmb.nl: Video, Camcorders, Tape recorders
  • Technivision www.technivision.nl Eindhoven: image and sound equipment repairs
Belgium:
  • Steve De Wachter, E-mail: kipropsandcollectables@gmail.com, Korenbloemstraat 24, 9150 Kruibeke, East Flanders, Belgium.
Australia:
  • Joel Bleakley – Melbourne area – joelbleakley@gmail.com
France: Italy:
  • Ciao da Francesco E-mail: prospero1977@hotmail.com (16mm, 35mm, 70mm film equipment)
United Kingdom:
  • John White Projector Repair: http://www.the8mmshedshop.co.uk/
United States:
  • John Capazzo – New Jersey USA – Phone: 973 923 0636 – Repairs Elmo, Eumig ans Sankyo
  • Bill Phillips – 16mmprojector repair https://16mmprojectorrepair.com/ pcav@optonline.net – Eiki, B&H, Hokushin, Long Island, NY.
  • http://www.rcsclassic16mm.com/ – Flin, MI, USA – B&H, EIKI, Elmo, Ringmaster
  • Paul Fortea (Chicage area) : Offering worm gear replacement and rebuilds on all Bell and Howell 1500-2500 series autoload or manual load projectors,no slot loads,prices will be very…. basic rebuilds include new aircraft aluminum gear,new main drive motor belt,timing adjustment,cleaning old and new lubrication..any other parts would need to be replaced,any soundboard issues I do not work on,either the board needs to be replaced or you will need to find an electronic person to diagnose,shipping both ways is your cost,if you live in the midwest dropoff is accepted…turnaround times varies,but usually a week or less..please email paulfortea@aol.com me if you have interest
Canada: