Slide Projectors Zett

All Devices | Digitize by Yourself | Electronics | Film Camera - analogue | Film Projector Parts | Film Projectors | Film, slide and photo scanners | Films | Formats | Information | Lamps | Miscellaneous | Photo Enlargers | Photograpy | Rewinders | Slide Projector Parts | Slide Projectors | Splicers | Video Equipment | Video Parts | Viewer Parts | Viewers

 

Zett, Ikolux Autofocus

Show device details

Zett Ikolux Autofocus

Marketet in 1992
Lamp: 24V, 150W, pin base lamp
Lens: Talon 1:2,8 85mm MC
Remote control: yes

Zett Ikolux Autofocus

Marketet in 1992
Lamp: 24V, 150W, pin base lamp
Lens: Talon 1:2,8 85mm MC
Remote control: yes
Meer lezen

Relevant products

  ET-0001
  SL-0065
  SL-0008
  LB-0008
  LB-0007
  SL-0094
  SL-0011
  SL-0080
Out of stock
  SL-0091
  SL-0090

Images

Click on an image to enlarge.

  • Zett Ikolux Autofocus

;

Frequently asked questions

Tips for repairing a film projector and addresses for repairs

Tips for repair of film or slide projector

Link to this page: https://van-eck.net/en/hrf_faq/kan-ik-zelf-mijn-filmprojector-of-diaprojector-repareren/ If a projector has been idle for a long time, a repair often begins with:
  • removing old fat
  • apply new lubrication
  • replacing strings
  • lamp replacement
If you are somewhat handy, the above problems can often be solved yourself, with the right tools and parts. This solves the problems in many cases. However, not always. Other common problems:
  • the lamp base is defective
  • gears are cracked and need to be replaced
  • electronic components are defective. You can think of capacitors, diodes, resistors, ICs.
  • the gripper adjustment is no longer correct
  • the framework setting must be adjusted
  • the cam / cam follower needs to be replaced.
For these problems it is often necessary to call in a professional. For parts to order, see our parts finder . Tools for repairing film projectors and slide projectors Maintenance products for cleaning and lubricating your film projector or slide projector  

Addresses for maintenance and repair film and video equipment

  Netherlands:
  • Corona Image Technology – Almere, https://www.coronabeeldtechniek.nl/projector-reparatie/ +31 (0)36 546 9565 service@coronabeeldtechniek.nl (all)
  • Erik Snel – Drachten, E-mail: menerik.snel@gmail.com (specialist Eumig and mechanical problems)
  • Digital Super8 – Venray, E-mail: digitalsuper8@gmail.com – repair of Elmo GS1200 and Bauer super8 projectors. Based on the intake, it is determined whether repair is possible or if necessary, a referral will be made.
  • Electro Service Midden Brabant (Udenhout – North Brabant) : https://www.esmb.nl: Video, Camcorders, Tape recorders
Belgium:
  • Steve De Wachter, E-mail: kipropsandcollectables@gmail.com, Korenbloemstraat 24, 9150 Kruibeke, Oost-Vlaanderen, België.
Australia:
  • http://www.projectorheaven.com.au/ – Goldcoast – dogtor@projectorheaven.com.au phone: 04111 43338
  • Joel Bleakley – Melbourne area – joelbleakley@gmail.com
France:
  • https://filmtech-riviera.fr/  (Cannes) repair of 8mm, 16mm and 35mm film equipment
  • https://backtosuper8.com/  (Lyon, France) repair of super 8 camera’s
Italy:
  • Ciao da Francesco E-mail: prospero1977@hotmail.com (16mm, 35mm, 70mm film equipment)
United Kingdom:
  • John White Projector Repair: http://www.the8mmshedshop.co.uk/
United States:
  • John Capazzo – New Jersey USA – Phone: 973 923 0636 – Repairs Elmo, Eumig ans Sankyo
  • Bill Phillips  – 16mmprojector repair  https://16mmprojectorrepair.com/  pcav@optonline.net  – Eiki, B&H, Hokushin, Long Island, NY.
  • http://www.rcsclassic16mm.com/ – Flin, MI, USA – B&H, EIKI, Elmo, Ringmaster
  • Paul Fortea (Chicage area) : Offering worm gear replacement and rebuilds on all Bell and Howell 1500-2500 series autoload or manual load projectors,no slotloads,prices will very.. basic rebuilds include new aircraft aluminum gear,new main drive motor belt,timing adjustment,cleaning old and new lubrication..any other parts would need to be replaced ,any soundboard issues I do not work on,either the board needs to be replaced or you will need to find an electronic person to diagnose,shipping both ways is your cost,if you live in the midwest dropoff is accepted…turnaround times varies,but usually a week or less..please email paulfortea@aol.com me if you have interest
Canada:
  • Cinemartin https://en.cinemartin.org/ – Film projection – Repair – 16mm looper