Presstape 8mm regular8 film

This package contains 40 tape strips, for 20 splices.

Splicers tape (press tapes) for 8 mm / regular8 film.
Each tape is perforated and transparent.

Use a tape strip on each side of the film for a neat and durable connection.

The press tapes are suitable for use with Van Eck Universal presstape splicer / Kodak Universal Presstape splicer

The tapes can also be used for almost all tape-based regular 8 splicers.

Please note, this article is suitable for 8mm / regular 8 films and not for super 8 / single 8 films.

Preparing a Film for Playback or Digitization

(If you have your films digitized by Van Eck Video Services, you do not need to do this yourself—this is included by default with the film transfer/digitization service.)

1. Use of Leader and Trailer Strips

Leader and trailer strips are empty pieces of film attached to the beginning (leader) and end (trailer) of a film. They serve several important functions:

• Protection: They prevent the first frames of the actual film from being damaged during threading into the projector.

• Ease of threading: The projector can more easily pick up the film and transport it correctly.

• Stability: The leader allows the projector to reach the correct speed and stability before the actual image begins.

• Identification: Different colors are often used (e.g., white or transparent for the beginning, red for the end) to clearly indicate where the film starts or ends.

👉 Make sure the leader strip is long enough (approximately 60–90 cm is ideal).

👉 Depending on the brand/type of projector used, the beginning of the leader may need to have a specific shape. This is usually indicated in the projector’s manual. The three most commonly used shapes are: straight, angled, and rounded.
To create this shape, it's best to use a film trimmer. Sometimes this is built into the projector, but separate trimmers are also available:

2. Film and Splice Inspection

Before playing the film, it is important to inspect it thoroughly.

What to check:

• Tears or holes near the perforations: These can cause transport issues or film jams.

• Splices: These are the connections between two pieces of film, often made using tape or film cement/splicing glue.

What to do with splices:

• Carefully test their strength. Gently pull on both sides of the splice to check if it still holds well.

• Ensure the splice lies flat. A splice that is too thick may cause jams during projection.

• Replace old or weak splices. Use a splicer and the appropriate tape or cement.

3. Using a Splicer

A splicer is a device used to neatly join film strips together.

Functions:

• Cuts the film straight so both ends align properly.

• Aligns perforations for smooth transport through the projector.

• Applies tape or cement accurately to create a strong, flat connection.

Tips:

• Clean the splicer regularly.

• Practice on a piece of old film if you have no prior experience.

4. Other Important Preparations

• Clean the projector—especially the sprockets, film guides, and lens.

• Use a film cleaner to remove dust and dirt from the film.

• Optionally, use a film rewinder to evenly wind the film after playback.

By carefully following these steps, you will extend the lifespan of your Super 8 film and ensure a stable, trouble-free projection.

References:

• Agfa K8
• Argus Splicer
• Bauer N8 Schmalfilm-Klebepresse
• Cinea Splicer
• Eumig Quick Splice
• Kodak Cine Kodak Duo Splicer
• Kodak Presstape Universal splicer
• LPL R-8 Patch tape splicer
• Marguet Magnetic 8-16 B
• Muray 120m Regular8
• Muray 240 m Regular 8 /16mm
• Pathex Splicer
• Reflecta Film Scanner Super 8 – Normal 8
• Siemens Professional Splicer 8mm/16mm
• Van Eck Presstape Universal Splicer
• Zeiss Ikon Splicer