Eumig RS3000 speed modification kit

 17,50

Eumig RS3000 speed modification kit (PA-0008)

The variable speedcontrol of the Eumig RS-3000 projector is normally in the ra…

1 in stock

Select delivery location

Description

Eumig RS3000 speed modification kit (PA-0008)

The variable speedcontrol of the Eumig RS-3000 projector is normally in the range of 18-24 frames per second.
With this modification, you can set the speed range between 15 – 25 frames per second.
This makes it possible to set the speed to 16,66 frames per second, allowing for flickerfree transfer to DVD.
The modification is performend on own risk.

The speed you can control precisely and does not expire.

Suitable for the following projectors:
– Eumig RS-3000

principle :
– A resistance is changed and the speed range is calibrated.

Tools and Skills :
To perform the work , the following tools are required : to avoid damaging ESD safe workplace for IC ; soldering iron and rosin core solder; stripper and cutter ; screwdrivers; tweezers or tongs ; desired speedometer projector ELV RC200

Here are some technical skills such as soldering and de- soldering , mounting and assembly required , together with a good attention / caution when opening / closing the projector cabinet and testing after installation .

Comes with installation instructions ( Dutch) – indicate to use if you need the instructions in an other language.

We can also install this kit in your projector.

Product No: PA – 0008

Additional information
Weight 5 g
Brand

State

Eumig RS3000 speed modification kit (PA-0008)

The variable speedcontrol of the Eumig RS-3000 projector is normally in the range of 18-24 frames per second.
With this modification, you can set the speed range between 15 – 25 frames per second.
This makes it possible to set the speed to 16,66 frames per second, allowing for flickerfree transfer to DVD.
The modification is performend on own risk.

The speed you can control precisely and does not expire.

Suitable for the following projectors:
– Eumig RS-3000

principle :
– A resistance is changed and the speed range is calibrated.

Tools and Skills :
To perform the work , the following tools are required : to avoid damaging ESD safe workplace for IC ; soldering iron and rosin core solder; stripper and cutter ; screwdrivers; tweezers or tongs ; desired speedometer projector ELV RC200

Here are some technical skills such as soldering and de- soldering , mounting and assembly required , together with a good attention / caution when opening / closing the projector cabinet and testing after installation .

Comes with installation instructions ( Dutch) – indicate to use if you need the instructions in an other language.

We can also install this kit in your projector.

Product No: PA – 0008

Weight 5 g
Brand

State

0
    0
    Cart
    Your cart is emptyReturn to shop