Elmo – Variable speed control – conversion set (PA-0006)
With this conversion kit you can adjust the speed of en Elmo projector at these rates:
15- 19 ( 18 bps ) and 19-26 (24 fps ) frames per second.
The speed you can control precisely and does not expire.
Suitable for Elmo projectors . Tested for:
-Elmo ST -600 series (only possible in the version with the IC ( see photo ).
In the version without IC it is not possible to build in the speed control
– Elmo SC -18
Does NOT work for the Elmo ST-800 series (a seperate kit is planned for this projector)
principle :
– A resistance is changed and an additional potentiometer is mounted on the outside of the projector.
Tools and Skills :
To perform the work , the following tools are required : to avoid damaging ESD safe workplace for IC ; soldering iron and rosin core solder; stripper and cutter ; screwdrivers ; metal drill 6 and 10 mm ; wrench 14 ; tweezers or tongs ; desired speedometer projector ELV RC200
Here are some technical skills such as drilling metals , soldering and de- soldering , mounting and assembly required , together with a good attention / caution when opening / closing the projector cabinet and testing after installation . The installation is done at your own risk .
Comes with installation instructions ( Dutch) – indicate to use if you need the instructions in an other language.
We can also install this kit in your projector.
Weight: 25 grams
Product No: PA – 0006